478,skta,754,939,940, 775 Fan: Cnps7700-Alcu - Cpu Cooler Fan

MODEL- CNPS7700-AlCu    VENDOR- ZALMAN USA
    
FEATURES- CPU Cooler Fan- Aluminum & Copper
       Supports Intel Pentium4 Socket 775/478 or AMD Sempron/AMD64 Socket 
        754/939/940.
       Note: No motherboard components with a height greater than 39mm 
             (1.53 inch), as well as the PSU, disk drives, VGA card, and 
             RAM should be present within a 68mm (2.68 inch) radius from 
             the center of the CPU.
       Does not generate noise or vibration in Silent Mode.
       Pure Copper and Pure Aluminum base material ensures excellent heat 
        dissipation.
       Intel Pentium 4 (Socket 775), Intel Pentium 4 (Socket 478), and 
        AMD64 (Socket 754/939/940) compatible design for broad 
        compatibility.
       The large 120mm fan inside the FHS maximizes cooling performance by 
        providing sufficient airflow even at slow rotation speeds.
       The large 120mm fan provides air flow over a large area, cooling not 
        only the CPU, but the VGA card, Northbridge, FET, and RAM.
       The adjustable fan speed controller (FAN MATE 2) enables control of 
        noise and fan performance.
    Includes Heatsink Assembly (CNPS7700), Four Grips (2 each for S-Type 
      and L-Type), Four Bolts, Thermal Grease, Fan Speed Controller (FAN 
      MATE 2), Double-sided Tape (for installing FAN MATE 2), Cable for FAN 
      MATE 2 and Users Manual - in English and Korean.
     Also includes for Intel Pentium 4 (Socket 775): One Clip Support for 
      Socket 775, One Backplate for Socket 775, Four Clip Support Fixing 
      Bolts.
     Also includes for Intel Pentium 4 (Socket 478): Two Clip Supports for 
      Socket 478.
     Also includes for AMD Sempron/AMD64 (Socket 754/939/940): (2) Nipples,
       One Backplate for AMD64, One set of Washers.
     
  -- SPECIFICATIONs -------------------------------------
CNPS7000B-Cu  - Dimensions        : 136 (L) x 136 (W) x 67 (H) mm 
                Weight            : 600 grams
                Base Material     : Pure Copper & Pure Aluminum
                Dissipation Area  : 3,268 cm2
                Bearing Type      : 2-Ball
                Speed             : 1,000 ~ 2,000 RPM +/- 10%
                Thermal Resistance: 0.21 ~ 0.20 degrees C/W
                Noise Level       : 20 ~ 32 dB +/- 10%
FAN SPEED CONTROLLER- (FAN MATE 2)
                Dimensions        : 70 (L) x 26 (W) x 26 (H) mm 
                Weight            : 20 grams
                Output Voltage    : 5V ~ 11V +/- 2% 
                Allowable Power   : 6W or lower 
                Connector         : 3-Pin 
www.zalman.co/kr