Cf Rfid Reader Card Hf

MODEL- RF5400-542         VENDOR- SOCKET
    
FEATURES- CF RFID Reader Card 6E- Single
       Add plug-in RFID capabilities to Pocket PC applications!
       Now add high frequency RFID capabilities to your mobile data 
        collection application with Sockets CompactFlash RFID Reader Card. 
        This product reads and writes to all ISO 15693 and many proprietary 
        13.56Mhz RFID tags being used or deployed for asset tracking, 
        access control, process control and healthcare/medical/
        pharmaceutical applications.
       Like all Sockets bar code scanning products, the RFID Reader card is 
        supported by SocketScan keyboard wedge software which sends the 
        RFID tag ID to any Windows application as virtual keystrokes -- No 
        custom programming needed! A small additional application allows 
        reading and writing to the accessible tag memory blocks. An SDK is 
        available for developers who wish to embed control of the RFID 
        Reader read/write functionality into their applications.
       As with all of our products, Socket designed the Mobility Friendly 
        CF RFID Reader to use minimal power. Drawing only 11mA (36mW) in 
        idle mode, the CF RFID Reader will operate for hours without having 
        to recharge the batteries in your Pocket PC.
* Integrated Type II CF card plugs into the Type II CompactFlash slot of 
  Windows Powered Pocket PCs. 
* High Frequency -- 13.56MHz Reader/Writer 
* Read range -- Maximum 2.5 inches (6.35cm) -- Varies with size of tag 
  antenna.
* Reads all data from the most popular HF ISO 15693 tags, including:
  ICode SLI/SL2, LRI512, my-d and Tag-It HF-I.
* Reads all data from ICode 1, Tag-It HF and PicoTag proprietary HF tags.
* Reads multiple tags simultaneously in Loop Mode. 
* Supported by the same SocketScan and SDK that supports all Socket bar 
  code scanner products.
* Sockets SocketScan software sends tag ID code to any Windows application 
  as virtual keystrokes.
* SocketScan enables the creation of prefixes and suffixes, such as Tab or 
  Carriage Return, to further eliminate key strokes in the data collection 
  process.
* SocketScan enables the assignment of a beep tone to signify a successful 
  read.
* This Battery Friendly solution draws only a few milliamps of current in 
  standby mode, extending the battery life of your Pocket PC.
* No extra batteries or special power adapter required. The RFID Reader 
  Card gets power from the host Pocket PC. 
* Works with Windows-based development tools so you can easily create 
  custom applications.
   
  -- SPECIFICATIONs -----------------------------------
INTERFACE/BUS - Type II CompactFlash Card
SCANNER HEAD SIZE-
                1.76" x 1.93" x 0.82"
FREQUENCY     - 13.56MHz (HF)
READ RANGE    - 2.5 inches (6.35cm)
                Varies depending on tag antenna size
HF RFID TAGS SUPPORTED-
                ISO15693
                ICode SLI/SL2, LRI512, my-d & Tag-It HF-I
                Proprietary: ICode 1, PicoTag, Tag-It HF
COMPATIBILITY - Windows COM port
OS SUPPORT    - Windows CE.Net v4.2 (Windows Mobile)
APPROVALS     - FCC: Part 15, Class B
                CE: EN55024:1998
                C-TICK: s.182
POWER- 3.3 volt power supply: Idle: 11 mA
                              Read/Write: approx 52 mA
                              Can also use 5V
SIZE - 1.43" x 1.68" x 0.20"  
   www.socketcom.com  
                                             techsupport@socketcom.com