AtlasIED APF-15TU-USA Indoor/Outdoor Wall Mountable, In-wall, Ceiling Mountable, In-ceiling Speaker - 15 W RMS - Gray Baked Epoxy - 600 Hz to 55 kHz - 8 Ohm
AtlasIED APF-15TU-USA Indoor/Outdoor Wall Mountable, In-wall, Ceiling Mountable, In-ceiling Speaker - 15 W RMS - Gray Baked Epoxy - 600 Hz to 55 kHz - 8 Ohm
Part Number: APF-15TU-USA
Condition: New
Availability:
Out of stock
Notify Me
Best of Cleveland Award in the Computers category
Compsource is honored to be named to the Inc. 500|5000 list
Ranked among the top 500 companies
Microsoft authorized Education reseller
HP Qualified Supplies Partner
BBB Accredited Business Since 2000
Product Specifications
AtlasIED APF-15TU-USA Indoor/Outdoor Wall Mountable, In-wall, Ceiling Mountable, In-ceiling Speaker - 15 W RMS - Gray Baked Epoxy - 600 Hz to 55 kHz - 8 Ohm
Flanged Emergency Horn Speaker with 15-Watt 25V/70V Transformer Meets
Manufacturer Part Number: APF-15TU-USA
General Description
The APF-15TU-USA voice control loudspeaker is equipped with a compression driver to provide up to 15 Watts of continuous power handling, superior intelligibility and audio conversion efficiency for maximum sound projection and penetration.
The APF-15TU-USA may be flush mounted or recessed directly into interior/exterior walls or ceilings. Recessed installation may be accomplished by mounting loudspeakers into a 5 1/2" deep opening or recessed enclosure. Units will work with Atlas Sound L20 Series grilles, enclosures and mounting rings (refer to ATS003855). Accessory mounting kits Model MK-2 or FAMT-6 can be used to mount loudspeakers into 8" diameter baffles. The unit includes a built-in 25/70.7V Vari-Tap® transformer featuring a screw-driver adjustable, 7 position watt/impedance selection switch. Magnet assembly is equipped with self-aligning field replaceable diaphragm. Wiring terminals are protected with a vandal-resistant adapter cover for control equipment utilizing cable or conduit. The unit is finished in grey baked epoxy. The APF-15TU-USA meets or exceeds UL Standard 1480 for Fire Protective Loudspeakers and are capable of operating within an ambient temperature range of 70°C (158°F) to -40°C (-40°F). The all-metal, environment-resistant construction and re-entrant acoustic path assure protection against water, humidity, vermin, physical abuse, and corrosion. The unit is also California State Fire Marshal Listed. Additionally, the APF-15TU-USA complies with Buy American Act standards. Features
- 15 Watt High-Efficiency Compression Driver All Metal, Vandal and Environment-Resistant Construction for Indoor/ Outdoor Use Built-In Vari-Tap ® Transformer for Easy Impedance Selection Compatible with Round or Square Decorative Baffles Flange and Recessed Mounting Provisions for Use on Interior/Exterior Walls and Ceilings Recommended for High-Intelligibility Paging, Intercommunication, and Signaling UL Certified, Safety Listed to UL1480 UL Listed for Fire Protective Signalling Systems
The APF-15TU-USA voice control loudspeaker is equipped with a compression driver to provide up to 15 Watts of continuous power handling, superior intelligibility and audio conversion efficiency for maximum sound projection and penetration.
The APF-15TU-USA may be flush mounted or recessed directly into interior/exterior walls or ceilings. Recessed installation may be accomplished by mounting loudspeakers into a 5 1 / 2 " deep opening or recessed enclosure. Units will work with Atlas Sound L20 Series grilles, enclosures and mounting rings (refer to ATS003855). Accessory mounting kits Model MK-2 or FAMT-6 can be used to mount
loudspeakers into 8" diameter baffles.
The unit includes a built-in 25/70.7V Vari-Tap ® transformer featuring a screw-driver adjustable, 7-position watt/impedance selection switch. Magnet assembly is equipped with self-aligning field replaceable diaphragm. Wiring terminals are protected with a vandal-resistant adapter cover for control equipment utilizing cable or conduit.
The unit is finished in grey baked epoxy. The APF-15TU-USA meets or exceeds UL Standard 1480 for Fire Protective Loudspeakers and are capable of operating within an ambient temperature range of 70 ÌC (158 ÌF) to -40 ÌC (-40 ÌF). The all-metal, environment-resistant construction and re-entrant acoustic path assure protection against water, humidity, vermin, physical abuse, and corrosion. The unit is also California State Fire Marshal Listed. Additionally, the APF-15TU-USA complies with Buy American Act standards.
RMS Output Power: 15 W
Minimum Frequency Response: 600 Hz
Maximum Frequency Response: 55 kHz
Sensitivity: 120 dB
Impedance: 8 Ohm
Product Color: Gray Baked Epoxy
Form Factor: Wall Mountable
Form Factor: In-wall
Form Factor: Ceiling Mountable
Form Factor:
MANUFACTURER NAME: Atlas Sound
MANUFACTURER PART NUMBER: APF-15TU-USA
UPC EAN CODE:
LANGUAGE: EN
MARKET:US
| General Information: | |
General Description The APF-15TU-USA may be flush mounted or recessed directly into interior/exterior walls or ceilings. Recessed installation may be accomplished by mounting loudspeakers into a 5 1/2" deep opening or recessed enclosure. Units will work with Atlas Sound L20 Series grilles, enclosures and mounting rings (refer to ATS003855). Accessory mounting kits Model MK-2 or FAMT-6 can be used to mount loudspeakers into 8" diameter baffles. The unit includes a built-in 25/70.7V Vari-Tap® transformer featuring a screw-driver adjustable, 7 position watt/impedance selection switch. Magnet assembly is equipped with self-aligning field replaceable diaphragm. Wiring terminals are protected with a vandal-resistant adapter cover for control equipment utilizing cable or conduit. The unit is finished in grey baked epoxy. The APF-15TU-USA meets or exceeds UL Standard 1480 for Fire Protective Loudspeakers and are capable of operating within an ambient temperature range of 70°C (158°F) to -40°C (-40°F). The all-metal, environment-resistant construction and re-entrant acoustic path assure protection against water, humidity, vermin, physical abuse, and corrosion. The unit is also California State Fire Marshal Listed. Additionally, the APF-15TU-USA complies with Buy American Act standards. Features
The APF-15TU-USA voice control loudspeaker is equipped with a compression driver to provide up to 15 Watts of continuous power handling, superior intelligibility and audio conversion efficiency for maximum sound projection and penetration. The APF-15TU-USA may be flush mounted or recessed directly into interior/exterior walls or ceilings. Recessed installation may be accomplished by mounting loudspeakers into a 5 1 / 2 " deep opening or recessed enclosure. Units will work with Atlas Sound L20 Series grilles, enclosures and mounting rings (refer to ATS003855). Accessory mounting kits Model MK-2 or FAMT-6 can be used to mount loudspeakers into 8" diameter baffles. The unit includes a built-in 25/70.7V Vari-Tap ® transformer featuring a screw-driver adjustable, 7-position watt/impedance selection switch. Magnet assembly is equipped with self-aligning field replaceable diaphragm. Wiring terminals are protected with a vandal-resistant adapter cover for control equipment utilizing cable or conduit. The unit is finished in grey baked epoxy. The APF-15TU-USA meets or exceeds UL Standard 1480 for Fire Protective Loudspeakers and are capable of operating within an ambient temperature range of 70 ?C (158 ?F) to -40 ?C (-40 ?F). The all-metal, environment-resistant construction and re-entrant acoustic path assure protection against water, humidity, vermin, physical abuse, and corrosion. The unit is also California State Fire Marshal Listed. Additionally, the APF-15TU-USA complies with Buy American Act standards. | |
| Manufacturer | AtlasIED |
| Manufacturer Part Number | APF-15TU-USA |
| Manufacturer Website Address | http://www.atlassound.com |
| Brand Name | AtlasIED |
| Product Series | APF |
| Product Model | APF-15TU-USA |
| Product Name | APF-15TU-USA Speaker |
| Product Type | Speaker |
| Technical Information: | |
| RMS Output Power | 15 W |
| Minimum Frequency Response | 600 Hz |
| Maximum Frequency Response | 55 kHz |
| Sensitivity | 120 dB |
| Impedance | 8 Ohm |
| Physical Characteristics: | |
| Product Color | Gray Baked Epoxy |
| Form Factor | Wall Mountable
In-wall Ceiling Mountable In-ceiling |
| Speaker Installation | Indoor/Outdoor |
| Depth | 5.19" |
| Diameter | 5.6" |
| Weight (Approximate) | 2.50 lb |
| Miscellaneous: | |
| Application/Usage | Industrial
Commercial Transportation Recreation |
Questions and Answers
Questions and Answers | Ask CompSource |
Shipping / Returns
Shipping
Ground =
$12.95
(Delivery within 2-7 business days)
Two Day Air = $25.00
(Delivery within 2 business days)
Standard One Day = $35.00
(Delivery within next business day)
Priority = $45.00
(Delivery within next business morning)
U.S Mail Priority (AA,AE,AP only) = $30.00
FedEx International Economy (Canada only) = $85.00
Typically out of stock items are filled within 1 to 14 business days but can and may take longer.
Shipping dates are best estimates based on product location and may vary with holidays.
If product requires trucking, additional fees may apply.
* Some destinations are subject to Applicable State/Duty Taxes
Returns
CompSource realizes that every product may have different return guidelines. Please see the policy below regarding this item.
This Product Has Limited Exchange Privileges.
Limited returns within 30 days of purchase permitted on this product.
For support on this product, please contact Atlas Sound.
Atlas Sound Company's Information
Click Atlas Sound for all products
Product Reviews
Overall Rating | Write a Review
|
|
Best Sellers
More Best Sellers
Recently Viewed
Learn more about Speakers
Picking the Right Display for Your Home Theater System
When you envision a theater-like video experience, you probably think first of a projection system and a large screen TV. That's certainly the display of choice in the prototypical home theater.
As for the projection screen, you can choose between fixed-frame, pull-up/-down, or motorized screens, and most screen manufacturers offer a wide variety of screen materials to suit different projectors and environments. You also need to think about what screen shape you want: Do you want a standard 16:9 screen that's perfect for HDTV and many movies or a 2.35:1 screen that lets you watch CinemaScope movies with no black bars (this requires a suitably equipped projector and sometimes an add-on lens).
Of course, the two-piece projection system isn't the only option in the display realm. Flat-panel TVs are pretty much the driving force in the home entertainment marketplace. Smart TV, LED, OLED. 4K. HDR. The world of TVs is looking better every day, but also more confusing. Today, there's a wide array of high-definition (HD) and 4K Ultra HD sets to choose from, from bargain big screens to high-end displays that can cost as much as a car.
Home Theater Speaker Systems (5.1, 7.1 and more) The other main element that makes a trip to the movie theater so memorable is the enveloping audio, in which sound elements come at you from all directions. At home, the most basic surround sound speaker system consists of 5.1 channels. The "5" stands for speakers in the front left, center, front right, rear right, and rear left positions, while the ".1" belongs to a subwoofer that helps flesh out the bass for explosions and other low-end effects. Some home theater installers recommend the use of multiple subwoofers to help deliver smoother bass response across a wider listening area. Most higher end surround systems use dedicated Pre-Amps, amplifiers and or receivers. These can be connected to In-ceiling speakers, In-wall speakers, Floor Standing speakers and of course Subwoofers.
CompSource also makes it easy with Home Theater Systems in a box. While these may not be as robust as a dedicated system they still sound great for many home users with limited budgets or not interested in as elaborate of a theater system.
If a home theater system is just a bit much, you can always consider a Sound Bar. Sound Bars include a speaker that has a left, center and right speaker as well as a sub woofer. Often times they have wireless speaker options as well and typically can be installed with little effort from the home owner.
We’re here to help you decide. We even have installers on premise that you can speak with!
Chat with us or give our professionals a quick phone call (800)-413-7361, we can assist with the best solution for your needs and budget.
Very nice website, easy navigation, GREAT prices on their products and great shipping charges. Very Nice! steveroddamMore Reviews



















