InteGreat All Power table boxes are a perfect compliment to Integreat A/V table boxes, supplying more table top outlets for meeting attendees. It has attractive finishes that can match any room décor. Combine it with other InteGreat products for a comprehensive solution to managing and delivering power, communication and A/V connectivity to meeting room spaces. This field wired version can be easily installed using MC type cable. The wiring compartment contains leads with easy to wire Wago splicing connectors. Attractive Design - InteGreat All Power Table Boxes have a brushed, anodized cover available in either black or Black finishes, with beveled edges and a "soft-touch" handle. The "pocket" door in the cover fully recesses into the box when open, giving access to connections without obstructing the work surface. A finishing plate hides hardware on the activation surface and allows for labeling of the AVIP plates. Adjustability - The activation surface of the InteGreat All Power Table Box can be adjusted down, in 1/2" [12.7mm] increments, from 1" to 4" [25mm to 102mm] to allow the cover to close even when using large style connectors. Ease of Installation - Hole cuts are made easy with the included template. Simply configure your connectivity, set your activation height, place box in the cut out, and secure it below the table with the bracket and set screw. The cover flange allows for 1/4" [6.4mm] of forgiveness in the cut out opening. InteGreat All Power Table Boxes have a 12' SJT cord for easy connection to the electrical infrastructure. 93230InteGreat All Power table boxes supply four 15A receptacles to the table surface, and two more 15A receptacles on the underside of the box to power A/V devices.